Boat Maintenance: 2007 Sea Ray Select
(Morro Bay Specific)
0 messages
Updated
Lakes Online Forum
83,630 messages
Updated 5/22/2024 10:56:34 PM
Lakes Online Forum
5,193 messages
Updated 4/3/2024 3:47:36 AM
(Morro Bay Specific)
0 messages
Updated
Lakes Online Forum
4,169 messages
Updated 4/15/2024 11:05:05 PM
Lakes Online Forum
4,260 messages
Updated 3/24/2024 9:24:45 AM
Lakes Online Forum
2,976 messages
Updated 3/20/2024 11:53:43 PM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
|
|
|
|
Name:
|
MartiniMan
-
|
Subject:
|
2007 Sea Ray Select
|
Date:
|
5/11/2016 1:33:40 PM
|
|
Let me second what Lifer said about a compression check and make sure you do it on a fully warmed engine in order to be accurate. Having said that, aircraft engines have a compression check on at least an annual basis and it is usually only useful when a cylinder or valve is completely gone or as a long term trend monitor versus being all that helpful for a prepurchase inspection item.
I would take it one step further for a boat that old with that few hours. I would borescope each of the cylinders. The main cause of damage to a motor sitting for some time is corrosion and a compression check won't answer that question. It will only tell you if the rings or valves are worn. It's possible it was properly maintained while not being run but I would be very suspicious of corrosion. Having just spent $5K overhauling an engine that had sat for a number of years before I bought it I can tell you its a costly mistake.
You will also need to inspect all the belts and hoses as they will also likely be in bad shape if it has indeed been sitting that long.
|
|