Boat Maintenance: Buying a new prop - Need Help
(Bear Creek Reservoir Specific)
9 messages
Updated 11/3/2023 6:12:58 AM
Lakes Online Forum
83,680 messages
Updated 6/18/2024 8:01:25 AM
Lakes Online Forum
5,197 messages
Updated 6/10/2024 5:39:11 AM
(Bear Creek Reservoir Specific)
0 messages
Updated
Lakes Online Forum
4,170 messages
Updated 6/10/2024 6:29:37 PM
Lakes Online Forum
4,261 messages
Updated 5/28/2024 6:31:10 AM
Lakes Online Forum
2,977 messages
Updated 6/10/2024 6:30:23 PM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
|
|
|
|
Name:
|
Osms
- 
|
|
Subject:
|
Buying a new prop - Need Help
|
|
Date:
|
5/31/2005 10:43:07 AM
|
|
Pretty much enough's been said--except: To get best prerformance, load your boat the way your use it - gas, people, coolers, junk, etc. and run WOT. Check the max rpm you get against the max recommended rpm range. Manufacturers will quote a range like 4200-4800--stay close to the upper end for best performance, life of engine, mileage, etc. In this example, if you are turning 4600 rpm with your current prop you need to decrease your prop pitch by 2" to get up to 4800 for best results. And vice versa.
Unfortunately, a prop can not add what the engine cannot deliver. Horsepower rules. By the way, Prop shops can change the pitch of your existing aluminum or stainless prop plus or minus 2". These lake dealers probably will tell you differently--because they only sell props.
Mobile, AL has a number of prop shops. Cost should not exceed $100-150 to re-pitch.
|
|
Reply
Back
Search
Boat Maintenance Forum
»
Alabama Lakes
»
Bear Creek Reservoir
Login
|
Home
